MOTMap-1510  > 0026192041

suppliers of 0026192041 and PDF data of 0026192041

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  
0026192041 molex  IN STOCK!P  dc06    2000 
    TianYang Electronics Co.,Ltd
  • Contact:Sue
  • Tel:86-21-51611472
  • Fax:
  • Email: sue@tycelec.com


0026192041 molex    dc06  IN STOCK!Pack: 500/b  2000 
    Wei&Keng Technology Developing..
  • Contact:dannyuan
  • Tel:86-755-83290418
  • Fax:
  • Email: sales@weikengtech.com
0026192041 molex    dc06  IN STOCK!Pack: 250/b  2000 
0026192041 molex  IN STOCK!P  dc06    2000 
0026192041 molex  IN STOCK!   dc06    2000 


0026192041 molex        2000 
0026192041 molex    dc06  IN STOCK! pack: 500/  2000 
0026192041 molex        dc06 
    PengWeiDa Technology (HK)Co.,L..
  • Contact:Franco
  • Tel:86-0755-82764150
  • Fax:86-0755-82736204
  • Email: pwdhk@vip.163.com
0026192041 molex    dc06  INSTOCK!vpe:500/bulk  2000 
    ShowtechInternational(hk)CO.,L..
  • Contact:Ms.RitaLin
  • Tel:886-0755-82709648
  • Fax:886-0755-82709649
  • Email: showtech@hkin.com

0026192041 Datasheet
125MHz Synthesizer This synthesizer employs a phase-locked loop (PLL) to generate a 125MHz timing reference from the 25MHz reference clock. This 125MHz reference is used by the 100BASE-TX transmit function and is divided by 5 to provide a 25MHz data strobe on TX_CLK. TX_CLK is frequency and phase locked to the 25MHz reference with a small phase offset. The synthesizer is disabled when not in 100BASE-TX mode.
0026192041 Price

Parameter Symbol SIPA SIPB SIPD SIPG SIPJ Unit
Device marking code SA SB SD SG SJ
Maximum reverse voltage VRM 50 100 200 400 600 V
Maximum average forward rectified current Fig.l IF(AV) 1 A
Peak forward surge current 10ms single half sine-wave superimposed on rated load IFSM 30 A
Typical thermal resistance (1) ROJA ROJL RejC 1 05 1 5 20 oC/W
Operating junction temperature TJ 150 oC
Storage temperature TSTG -55 to +150 oC


SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT
Is ISM VSD Continuous source current (body diode) Pulsed source current body diode) Diode forward voltage IF = 25 A; VGS = 0 V 0.87 47 1 88 1.2 A A V
trr Qrr Reverse recovery time Reverse recovery charge IF = 20 A; -dIF/dt = 100 A/ s; VGS = 0 V; VR = 25 V 82 0.26 ns


Symbol Parameter CondItIons Mln Max Unlt
VIH Input HIGH Level 2O Vcc+.5 V
VIL Input LOW Level -0.3 0.8 V
VOH Output HIGH Voltage3 Vcc = Min, IOH = -4.OmA 2.4 V
VOL Output LOW Voltage3 Vcc = Min, IOL = 12mA 0,45 V
ILI Input Leakage Current VIN = OV to Vcc 10
ILO Output Leakage Current Vout = OV to Vcc 10
lccl VCC Standy Current (TTL) /CE-VIH, /OE=VIL 25 mA
ICC2 VCC Standby Current (CMOS) /CE=Vcc-0.3V to Vcc+0.3V 1 mA
ICC3 VCC Active Current /CE=VIL, /OEsVIH, f=lOMHz 50 mA
IPP1 VPP Current During Read VPP= 5.5v 100