| Pin Number | Pin Name | Pin Type | Pin Description |
| 1 | SO | Input | Select pin 0. See Tablel. Internal pull-up resistor. |
| 2 | Sl | Input | Select pin l. See Table l. Internal pull-up resistor. |
| 3 | SSO | Input | Spread Select pin 0. See Table 2. Internal pull-up resistor. |
| 4 | Xl/ICLK | Input | Crystal or clock input. Connect to a 25 MHz crystal or single ended clock. |
| 5 | X2 | Output | Crystal connection. Leave unconnected for clock input. |
| 6 | OE | Input | Output enable tri-states outputs and device is not shut down. Internal pull-up resistor. |
| 7 | GNDXD | Power | Connect to ground. |
| 8 | SS1 | Input | Spread Select pin l. See Table 2. Internal pull-up resistor. |
| 9 | IREF | Output | Precision resistor attached to this pin is connected to the internal current reference. |
| 1 0 | CLK1 | Output | HCSL compliment clock output. |
| 1 1 | CLK1 | Output | HCSL clock output. |
| 1 2 | VDDODA | Power | Connect to voltage supply +3.3 V for output driver and analog circuits |
| 1 3 | GNDODA | Power | Connect to ground. |
| 1 4 | CLKO | Output | HCSL compliment clock output. |
| 1 5 | CLKO | Output | HCSL clock output. |
| 1 6 | VDDXD | Power | Connect to voltage supply +3.3 V for crystal oscillator and digital circuit. |
| | | |
| -*- -40 C . -- 26 C _ 85 C | | | | | | | | |
| | |
| | -*- -40 C | } | | h | __ 1 | | | | |
| | |
| | | | | | | | | |
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation s not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-l inch, 2-ounce copper trace with no air flow. 2. 10 Absolute Maximum Rating Must be Obtained. 3. Tested to EINJESD22-A114-A, rated to EINJESD22-A114-B. 4. Tested to EINJESD22-A115-A, rated to EINJESD22-A115-A. 5. Tested to JESD22-C101-A. 6. Tested to EIA/JESD78.
