1812YG106ZG11A Datasheet| ltem | Symbol | Test Conditions | Min | Typ') Max Unit | | Input leakage current | |Ll | VIN=Vss to Vcc | 1 | 1 uA | | Output leakage current | ILO | CSl=VIH,CS2=VIL or OE=ViH or WE=ViL, Vio=Vss to Vcc | 1 | 1 uA | | Average operating current | lcci lcc2 | Cycle time=lUs, 100%duty, lio=OmA, CSi10.2V, CS2>Vcc-0.2V, VIN10.2V or VIN>VCC-0.2V Cycle time=Min, lio=OmA, 100% duty, CSi=VIL, CS2=V1H, LB=ViL or/and UB=VL, MN=VL or VIH | | 2 mA 17 mA | | Output low voltage | VOL | IOL= O.lmA | | 0 2 V | | Output high voltage | VOH | IOH= -O.lmA | 1.4 | V | | Standby Current(CMOS) | ISB1 | Other input =O~Vcc 1) CSi>Vcc-0.2V, CS2>Vcc-0.2V(CSl controlled) or 2) OVlCS210.2V(CS2 controlled) | | 0 5 10 uA | | | | | |
1812YG106ZG11A Price ANG -22.7 -30.4 -32.3 -31.9 -32.1 -31.9 -30.4 -31.3 -32.8 -31.8 -33.2 -34.8 -36.0 -37.3 -39.0 -41.4 -41.7 -42.1 -44.8 -49.9 -49.5 -53.3 -58.2 -56.8 -59.7 -59.6 -67.5 -71.7 -66.7 -73.2 1812YG106ZG11A on stock| CONDITION | DESCRIPTION | FLAG | | NORMAL | Normal operation and adequate protection supply voltage | LOGIC LOW | | OVER TEMP. | Over temperature detected | LOGIC HIGH | | SHORT CIRCUIT | Overload condition detected | LOGIC HIGH | | SUPPLY FAULT | Inadequate protection supply voltage | LOGIC HIGH | | | |
Prior to any access operation, the CAS latency, burst length, and burst sequence must be programmed into the device by address inputs AO-A11, BSO, BSl during a mode register set cycle. In addition, it is possible to program a multiple burst sequence with single write cycle for write through cache oper- ation.
|
