| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| 269085-3 | AMP | 上边 | 11 |
|
 |
||
| 269085-3 | AMP | 06/07+ | HOT OFFER | 10 |
|
 
|
|
| 269085-3 | AMP | 光纤接发器 | 2 |
|
|||
| 269085-3 | AMP/TYCO | N/A | TRANSCEIVER | 1 |
|
269085-3 Datasheet
269085-3 on stock I No products described or contained herein are intended for use in surgical rmplants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injur7, death or property loss. Ordering Information: Select the complete ten digit module part number you desire from the table below. Example: RM400HA-34S is a 1700 Volt, 400 Ampere, Super Fast Recovery Single Diode Module. The control register is accessed with a special pream- ble in the slave byte (1011) and is located at address 1FFh. It can only be modified by performing a byte write operation directly to the address of the register and only one data byte is allowed for each register write operation. Prior to writing to the control register, the WEL and RWEL bits must be set using a two step process, with the whole sequence requiring 3 steps. See "Writing to the Control Register". |
|||||||||||||||||||||||||||||||||||||||||||||
