The programming mode is eritered when +12.75 V is applied to the VPP pin and CE is at VIL. A 0.1 LtF capacitor between VPP and GND is needed to prevent excessive voltage transients, which could damage the device. The address to be programmed is applied to the proper address pins. 8-bit patterns are placed on the respective data pins. The voltage levels should be standard TTL levels.
351-6246-010/CB0177 Price IC = INenn, VCE = +15V VCE = +15V le = INenn, VCE = +15V VCE = +15V le = INenn, VCE = +15V VCE = +15V le = INenn, VCE = +15V VCE = +15V le = INenn, VCE = +15V
| SYMBOL | PARAMETER | CONDITIONS | MIN | MAX | UNIT |
| Vc | Electrostatic discharge capacitor voltage | Human body model; C = 250 pF; R = 1.5 kl | | 2 | kV |
| | | | | |
| | | | | TC = 1000C, i | :IIF/dt = 200/ | JccS | |
| | | | | | j | j | |
| | | | | ___ - | | | |
| | | | | | |
| | | | | 'a tb | | | |
| | | | | | | | 0.5 |
| | | | | | | |
