| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| MC74HC132AM | MOT | SOP | 99 | Original | 1200 |
|
|
| MC74HC132AM | MOTOROLA | . | . | 8 |
|
 
|
|
| MC74HC132AM | MOTOROLA | . | . | 8 |
|
|
|
| MC74HC132AM | 99+ | 1200 |
|
||||
| MC74HC132AM | MOTOROLA | SOP | 04+ |
|
|||
| MC74HC132AM | SOP | MOT | 99 |
|
|||
| MC74HC132AM | MOT | SOP | 99 | new and original | 1200 |
|
|
| MC74HC132AM | 1200 | MOT | 99 |
|
|||
| MC74HC132AM | MOT | 99 | 专业IC现货供应 | 1943 |
|
||
| MC74HC132AM | MOTOROLA | SOP | 04+ | 3200 |
|
||
| MC74HC132AM | SOP | 99 | 1200 |
|
|
MC74HC132AM Datasheet ~ Glass passivated junction. ' For surface mounted application ' Low forward voltage drop. ' High current capability. ' Easy pick and place. ' High surge current capability. MC74HC132AM Price - It corresponds to the low voltage supply of the control part of the circuit. If VDD goes below 8V, the start-up current source is activated and the output power MOSFET is switched off until the VDD voltage reaches 11V. During this phase, the internal current consumption is reduced, the VDD pin is sourccng a current of about 2mA and the COMP pin is shorted to ground. After that, the current source is shut down, and the device tries to start up by switching again. MC74HC132AM on stock I Anyone purchasing any products described or contained herain for an above-mentioned usa shall: 0 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, lointly and severally, against any and all claims arid litigation and all damages, cost and expenses associated with such use: cD Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their offioers and employees jointly or severally. llnformation (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranl eed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or othar rights of third parties. 4. The max calibrated gain and offset errors are based on a 15-bit calibration procedure to generate the calibration factors. These calibration factors are then applied to correct the ADC results. FEATURES: 'Collector-Emitter Sustaining Voltage- VCEO(sus) = 800 V (Min) ' Collector-Emitter Saturation Voltage - VCE(gt) = 2.0 V (Max.)@ lc = 3.0 A, lB = 0.6A * Switching Time - tf = 0.7 us (Max.)@ lc =4.0 A |
