| Conduction angle | Sinusoidal conduction | Rectangular conduction | Units | Conditions |
| 1800 | 0.020 | 0.015 | | Tj= Tj max. |
| 1200 | 0.024 | 0.025 |
| 900 | 0.031 | 0.034 | K/W |
| 600 | 0.045 | 0.047 |
| 300 | 0.077 | 0.077 |
| | | | |
Generates all clocks of Hub. Translates the high-speed transactions (split transactions) for full/low-speed device to full/low-speed transactions. ALL_TT buffers the data transfer from either upstream or downstream direction. For OUT transaction, ALL_TT buffers data from upstream port and sends it out to the downstream facing ports after speed conversion from high-speed to full/low-speed. For IN transaction, ALL_TT buffers data from downstream ports and sends it out to the upstream facing ports after speed conversion from full/low-speed to high-speed. Data & clock recovery circuit Downstream Port Controller handles Port Reset, Enable, Disable, Suspend and Resume Downstream transceiver supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction Endpoint o controller Endpoint l controller Manages hub's synchronization by using micro-SOF which is received at upstream port, and generates SOF packet when full/low-speed device is attached to downstream facing port. Full/low-speed repeater is enabled when the ,uPD720114 are worked at full-speed mode Oscillator Block On chip 2.5V regulator Serializer and Deserializer Serial Interface Engine (SIE) controls USB2.0 and l.1 protocol sequencer. Upstream Transceiver supports high-speed (480 Mbps), full-speed (12 Mbps) transaction Upstream Port Controller handles Suspend and Resume
