| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| NACEW100M63V6.3X5.5TR13F | NIC | 07+ | 36000 |
|
NACEW100M63V6.3X5.5TR13F Datasheet
NACEW100M63V6.3X5.5TR13F on stock The open drain diagnostic output needs an exter- nal pull-up resistor to a 5V supply. In systems with several L9997ND the diagnostic outputs can be connected togetherwith a common pull-up re- sistor. The DIAG output current is internally lim- ited. Fig. 1 shows a typical application diagram for the DC motor driving. To assure the safety of the cir- cuit in the reverse battery condition a reverse pro- tection diode Di is necessary. The transient pro- tection diode D2 must assure that the maximal supply voltage Vvs during the transients at the VBAT line will be limited to a value lower than the absolute maximum rating for Vvs. Thanks to highly sensitive triggering levels, the TS420 series is suitable for all applications where the available gate current is limited, such as motor control for hand tools, kitchen aids, overvoltage crowbar protection for low power supplies, ... Available in through-hole or surface-mount packages, they provide an optimized performance in a limited space area. |
|||||||||||||||
