PC-74HC125T-D，there are the best PC-74HC125T-D suppiers all over the world here.These are the list and detailed contact method of PC-74HC125T-D suppliers all over the world as follows.You can buy or get informations of PC-74HC125T-D through email , message or tel.

suppliers of PC-74HC125T-D and PDF data of PC-74HC125T-D

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PC-74HC125T-D Datasheet

MA4E929A-135A. Only the MA4E929 series is available as a chip. 2. Test conditions: 0.5 Watts for 1 psec maximum	For Tss: Video Bandwidth = 1 MHz Noise Amplifier = 3.5 dB Test Frequency: X-Band = 10 GHz Ku.Band = 16 GHz Voltage Sensitivity: PIN = -30 dBm Ru =1 M (Ohms)
100 mW	Test Frequency = as stated 3. Higher Rv values are available on request. Contact the factory. 4. The nominal junction capacitance values are as follows: Diodes with Rv ~0.5 t0 2.0 k Ohms, Cj ~0.30 pF (maximum)
	Diodes with Rv ~2.0 t0 5.0 k Ohms, Cj ~0.25 pF (maximum) Diodes with Rv ~5.0 t0 15.0 k Ohms, Cj ~0.20 pF (maximum) 5. The2nominalrRs isc~30 0hms maximum. 6. TestOfrequencypbandgis X-Band.
	2000C for 5 sec (maximum) M/A-COM,lnc. Tel.h(800)i366-2266 Fax (800) 618-8883

PC-74HC125T-D Price

CAUTION: These devices are sensitive to electrostatic discharge; follow proper lC Handling Procedures 1-888-INTERSIL or 321-724-7143 I Intersil (and design) is a registered trademark of Intersil Americas Inc Copyright ~ Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc All other trademarks mentioned are the property of their respective owners
PC-74HC125T-D on stock

In the read mode the X24C16 will transmit eight bits of data, release the SDA line and monitor the line for an acknowledge. If an acknowledge is detected and no stop condition is generated by the master, the X24C16 will continue to transmit data. If an acknowledge is not detected, the X24C16 will terminate further data trans- missions. The master must then issue a stop condition to return the X24C16 to the standby power mode and place the device into a known state.

CHARACTERISTIC	SYMBOL	MIN	TYP	MAX	UNIT
Supply Voltage	VDD			320	V
Forward Current	IF	5	7.5	25	mA
On-State Current	ION			120	mA
Operating Temperature	Topr	20		65	oc

Suppliers Datasheet
		Exact Matc