MOTMap-20  > PC232UD69V13CTF

suppliers of PC232UD69V13CTF and PDF data of PC232UD69V13CTF

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  

PC232UD69V13CTF Datasheet
The DQ993 automaLically retums to current-time mode five seconds after M2 goes LOW, If Ml is held HIGH afler secting the sleep r.ime, iC returns to the current-time mode. The remaining rime can be displayed by pulling M2 HIOH. Pull M3 HIGH to disable the sleep timer mode.
PC232UD69V13CTF Price
ON Semiconductor and-_, are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and allliability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PC232UD69V13CTF on stock

Parameter Symbol Test Conditions Min Typ Max Unit
Line Regulation RegImne TA = +25IC, 3V " Vi - Vo " 35V, Note 1 0.005 0.030 oN
Load Regulation Regload VO5V TA = +25IC, OmA " 10 " 3A, 5 25 mV
VO5V Note 1 0.1 0.5 %VO


9) General Call: It is assumed that the clock driver will not have to respond to the "general call." 10) Electrical Characteristics: All electrical characteristics must meet the standard mode specifications found in section 15 0f the I2C specification a) Pull-Up Resistors: Any internal resistors pull-ups on the SDATA and SCLOCK inputs must be stated in the individual datasheet. The use of internal pull-ups on these pins of below 100 k [ is discouraged. Assume that the board designer will use a single external pull-up resistor for each line and that these values are in the 5-6 kl range. Assume one I2C device per DIMM (serial presence detect), one I2C controller, one clock driver plus one/two more I2C devices on the platform for capacitive loading purposes.