PC2708T-F3，there are the best PC2708T-F3 suppiers all over the world here.These are the list and detailed contact method of PC2708T-F3 suppliers all over the world as follows.You can buy or get informations of PC2708T-F3 through email , message or tel.

suppliers of PC2708T-F3 and PDF data of PC2708T-F3

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PC2708T-F3 Datasheet

PARAMETER	SYMBOL	CONDITIONS	MIN TYP MAX	UNITS
I/O VCC- Three-State Output		TA = +250C, EN = 0, MAX3000E/MAX3001E/MAX3002/ MAX3004-MAX3012	0 1 2	UA
Leakage Current		TA = +250C, EN A/B = 0, MAX3003	0 1 2	UA
I/O VL_Three-State Output Leakage Current		EN A/B = 0, MAX3003	0 1 2	UA
I/O VL_ Pulldown Resistance During Shutdown		EN = 0, MAX3000E/MAX3001E/MAX3002/ MAX3004-MAX3012	4 59 8 30	kQ
EN or EN rVB Input Leakage Current		TA= +250C	1	UA
LOGIC-LEVEL THRESHOLDS
I/O VL_ Input Voltage High Threshold	VIHL		VL - 0.4	V
I/O VL_ Input Voltage Low Threshold	VILL		0 4	V
I/O VCC- Input Voltage High Threshold	VIHC		vcc - 0.4	V
I/O VCC- Input Voltage Low Threshold	VILC		0 4	V
EN, EN A/B Input Voltage High Threshold	VIH		VL - 0.4	V
EN, EN A/B Input Voltage Low Threshold	VIL		0 4	V
I/O VL_ Output Voltage High	VOHL	I/O VL_ source current = 20UA, l/0 VCc_ > vcc - 0.4V	VL - 0.4	V
I/O VL_ Output Voltage Low	VOLL	I/O VL _ sink current = 20UA, I/O VCC - i 0.4V	0 4	V
I/O VCC- Output Voltage High	VOHC	I/O VCC- source current = 20UA, l/0 VL_ > VL - 0.4V	vcc - 0.4	V
I/O VCC- Output Voltage Low	VOLC	I/O VCC sink current = 20UA, I/O VL_i 0.4V	0 4	V
ESD PROTECTION
I/O VCC-		Human Body Model, MAX3000E/MAX3001E	±15	kV

PC2708T-F3 Price

CL includes probe and jig capacitance. Waveform l is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. All input pulses are supplied by generators having the following characteristics: PRR " 10 MHz, Zo = 50 I , tr " 2.5 ns, tf " 2.5 ns. The outputs are measured one at a time, with one transition per measurement. tPLZ and tPHZ are the same as tdis. tPZL and tPZH are the same as ten. tPLH and tPHL are the same as tpd(s). The tpd propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance). All parameters and waveforms are not applicable to all devices.
PC2708T-F3 on stock

2. On cleaning the device: (a) Cleaning with unsuitable solvent may impair the resin of the package and the following solvents should be used at the temperature of less than 45 0C and for less than 3 minutes of immersion time. Ethanol. Methanot lsopropyl.alcohol (b) Ultrasonic cleaning will add some stress on devices. The degree of the stress differs depending on the oscillation outpul c)ower. the size of the PCB and the mounting methods of the devices. therefore it should be confirmed by making an experiment at actual conditions that the cleaning does not have any problem on the deivces.

VIH - VIL - _ VIH - w VIL - _ VIH - OE \, VIL - DQO ~ DQ7 VIH - VIL - DQ8 ~ DQ15 VIH - VIL -

Suppliers Datasheet
		Exact Matc