QS74FCT4X373ZQCTQ3，there are the best QS74FCT4X373ZQCTQ3 suppiers all over the world here.These are the list and detailed contact method of QS74FCT4X373ZQCTQ3 suppliers all over the world as follows.You can buy or get informations of QS74FCT4X373ZQCTQ3 through email , message or tel.

suppliers of QS74FCT4X373ZQCTQ3 and PDF data of QS74FCT4X373ZQCTQ3

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
QS74FCT4X373ZQCTQ3	1342	new&origin	N/A		2008+	saviliter technology co.,ltd Contact:rebecca Tel:86-10-62102365 Fax: Email: rebecca@saviliter-ic.com

QS74FCT4X373ZQCTQ3 Datasheet

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Gain Voltage	VG	Open Loop	62	65		dB
Gain Voltage	VG	Closed Loop	34.0	35.5	37.0	dB
Total Harmonic Distortion	THD	VO=1V			0.01	%
Output Voltage	VO		4.5			V
Input Resistance	ri		1 00	11 0		kl
Input Noise Voltage	VNI	Rg=2k l		1.0		ccV
Output Noise Voltage	VNO	Rg=2k l			12	mV

QS74FCT4X373ZQCTQ3 Price

SYMBOL	DESCRIPTION
AO - A18	Address Input
CE1	Chip Enable Input l, Low: Enable
CE2	Chip Enable Input 2, High: Enable, Low: Enter Power Down Mode
WE	Write Enable Input
OE	Output Enable Input
LB	Lower Byte Write Control
UB	Upper Byte Write Control
1/01 - 1/016	Data Inputs/Outputs
VDD	Power Supply
Vss	Ground
NC	No Connection

QS74FCT4X373ZQCTQ3 on stock

The controller in this unit requires initialization in the specified sequence quickly after the power supply is turned ON. After the controller has been initialized, a clock signal is properly transmitted to tha driver and causes the panel to normally turn ON. Never turn ON the high voltage panel power supply before the controller has been initialized, or when the controller is left incompletely initialized. This can lead to panel failure. To give the display control command, initialize the controller through the instruction register (IR) according to the following procedure, which consists of a series of 19 steps.

1. VD (U) 2. FO (U) 3. IN (U) 4. GND (U) 5. VD (V) 6. FO (V) 7. IN (V) 8. GND (V) 9. VD (W) 10. FO (W) 11. IN (W) 12. GND (W) 13. VD (1) 14. FO (1) 15. Open 16. Open 17. IN (X) 18. IN (Y) 19. IN (Z) 20. GND (L)

Suppliers Datasheet
		Exact Matc