QS74FCT825ATQX，there are the best QS74FCT825ATQX suppiers all over the world here.These are the list and detailed contact method of QS74FCT825ATQX suppliers all over the world as follows.You can buy or get informations of QS74FCT825ATQX through email , message or tel.

suppliers of QS74FCT825ATQX and PDF data of QS74FCT825ATQX

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

QS74FCT825ATQX Datasheet

READ MODE The DS1250W executes a read cycle whenever WE (Write Enable) is inactive (high) and CE (Chip Enable) and OE (Output Enable) are active (low). The unique address specified by the 19 address inputs (Ao - Ai8) defines which of the 524,288 bytes of data is to be accessed. Valid data will be available to the eight data output drivers within tACC (Access Time) after the last address input signal is stable, providing that CE and OE (Output Enable) access times are also satisfied. If OE and CE access times are not satisfied, then data access must be measured from the later-occurring signal (CE or OE) and the limiting parameter is either tco for CE or tOE for OE rather than address access.
QS74FCT825ATQX Price

	\'qIPPI F = 200mVp_p
		PU-	lFFERRED
		PU-







^

QS74FCT825ATQX on stock

CHARAOTERISTIC		SYMaOL	TEST CONDITION	X41N	TYP".	MAX	UNIT
	6N135	CTR	IF=16mA, V0,0.4V	7	18		%
	6N136	CTR	VCC.45V, Ta=25*C (Note l)	19	24		%
Current Transfer Ratio	6N135	CTR	IF=16mA, VO=05V	5	13		%
Current Transfer Ratio	6N136	CTR	VCC=45V ' (hWe l)	1S	21		%
	6N135		IF=t6mA,lO=1.1mA,VCC=45V		n1	0.4	V
LogIc Law Output Voltage	6N136	VOL	IF=16mA,10=2AmA,VCC=45V		n1	a4	V
		' IOH	IF=OmA, VO-VCC=55V Ta=25 C		3	5	nA
Logk HIgh Output Current		' IOH	IF =OmA, VO =VCC =15V Ta=250C		0.1'	1	IcA
Logk HIgh Output Current		IOH	IF =OmA, VO =VCC =15V			250
Logic Low Supply Current		ICCL	IF =16mA, VO =Opan, VCC=15V		40		rA
Logic High Supply Current		ICCH	IF=OmA,VO=Open VCC =15V, Ta=250C		001	1	A
Logic High Supply Current		ICCH	IF =OmA, VO =Open, VCC =15V			2
Inpul Forward Voltage		VF	IF =16mA, Ta=25aC		1	1.7	V
Temperature Coefficient of Focward Voltage		AVF ATa	IF =16mA		-{		U
Input Reverse Breakkwn Voltage		BVR	IR =10pA, Ta=250C	5			V
Input Capacitance		qN	llMHz, VF-O				pF
Input-Output Insulation Leakage Current		11o	45qh Relative Humidity, t=5S, VI 0=3000Vdq Ta=250C (hlote 2)			1D	jlA
Resistance (lnput-Oiltput)		Rl0	V10 =500Vdc (Note 2)		1012		0
Capacitance (Input Oulput)		CIO	f,lMHz (Note 2)		0.6		pF
Transistor DC Current GaIn		hFE	V0=5V,10=3mA		80

The TX5001 hybrid transmitter is ideal for short-range wireless data applications where robust operation, small size, low power consumption and low cost are required All critical RF functions are contained in the hybrid, simplifying and speeding design- in. The TX5001 includes provisions for both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The TX5001 employs SAW filtering to suppress output har- monics, facilitating compliance with FCC Part 15 and similar regulations.

Suppliers Datasheet
		Exact Matc