| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| QSC112CC6RO | 全新原装现货热卖 | 4000 |
|
|
QSC112CC6RO Datasheet The oscillator output (OSC) is enabled by INIT. The oscillator frequency is the ceramic resonator frequency divided by 8.5 for the first 16 cycles (during transmit) and then the oscillator frequency changes to the ceramic resonator frequency divided by 4.5 for the remainder of the device cycle. QSC112CC6RO Price 1 Falling or rising edge as determined by the control bits of the serial word. Strong or weak SDO driver selected via the control register. 2 Daisy_chain and readback modes cannot operate at maximum clock frequency. SDO timing specifications are measured with a load circuit, as shown in Figure 4 QSC112CC6RO on stock
All voltage values, except differential voltage, are with respect to network ground terminal. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. The magnitude of the input and the output voltages must never exceed the magnitude of the positive supply voltage Short circuit from outputs to Vcc+ can cause excessive heating and eventual destruction. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
