| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
R08058452FT1 Datasheet
R08058452FT1 Price To switch on the output again, the extemal control processor has to select the TRANSFER MODE and to change the input signal at the corresponding data terminal to HIG H to set the storage flip-flop and then to write in LOW. An additional reading of this chan- nel output (selecting the READ MODE after the mentioned check time) shows whether the short-cir- cuit is still present. R08058452FT1 on stock VTRIP Programming The X4043/45 is shipped with a standard Vcc thresh- old (VTRIP) voltage. This value will not change over normal operating and storage conditions. However, in applications where the standard VTRIP iS not exactly right, or if higher precision is needed in the VTRIP value, the X4043/45 threshold may be adjusted. The procedure is described below, and uses the applica- tion of a high voltage control signal.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
