R10-E1L4-V700，there are the best R10-E1L4-V700 suppiers all over the world here.These are the list and detailed contact method of R10-E1L4-V700 suppliers all over the world as follows.You can buy or get informations of R10-E1L4-V700 through email , message or tel.

suppliers of R10-E1L4-V700 and PDF data of R10-E1L4-V700

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

R10-E1L4-V700 Datasheet

From the basic, "Just Plug it In" functionality of the 6-A modules, to the 30-A rated feature-rich PTHxx030W, these products were designed to be very flexible, yet simple to use. The features vary with each product. Table 3-1 provides a quick reference to the available features by 5 product and input bus voltage.
R10-E1L4-V700 Price

With a decreasing RF input level the MPX decoder blends from stereo to mono to limit the output noise. The continuous mono to stereo blend can also be programmed via the I2C_bus to an RF level depending switched mono to stereo transition. Stereo Noise Cancelling (SNC) can be switched off via the I2C_bus.
R10-E1L4-V700 on stock

Features . One mold mini size package . Supply-voltage range : 4.5V t0 5.5V . Shielded against electrical field disturbance . Enhanced immunity against ambient light disturbances . Enhanced reception distance . Continuous data transmission possible (NRZ 1000 bit/s) . Available for carrier frequencies between 32.7KHz t0 56.9KHz . TTL and CMOS compatible

General descrrption EMF is a complete illuminated pushbutton switches programme for screw on panel mounting (mounting hole diameter 16 mm) The forms of lenses are available in the dimensions rectangular 18 x 24 mm, square 18 x 18 mm and round diameter 18 mm. The pushbutton switches are equipped with snap action element and 1-4 contact blocks Each contact block can be used as N C or N O or change-over contact (for change-over contact ext connection between terminals 2 and 4) Contacts in one section must be same polarity. EMF illuminated pushbutton switches can be fitted with contactless elements on request Separation of the individual switching elements by contactless units permits high and low voltages to be applied to the same pushbutton switch The 4 tin-plated terminals of each block are absolutely flux- proof The lense of EMF are available in 11 different colours and can be illuminated by Midget-Groove T l3/4 incandescent lamps or LED The switching positcons of the alternate version of the pushbutton switches is always indicated by the position of lens By use of neon lamps with external resistor1250 V~, please conslder relevant standards and approvals.

Suppliers Datasheet
		Exact Matc