When the power supply is turned on, Vcc rises from Vss to Vcc(min), passing through a value Vth in between. The device ignores all instructions un- til a time delay of tPU has elapsed after the mo- ment that Vcc rises above the Vth threshold. However, the correct operation of the device is not guaranteed if, by this time, Vcc is still below Vcc(min).No instructions should be sent until the later of:
RS3A-RA on stock| | | | | | | | |
| | | | oRoC | | ____ | _-_ | |
| | | 1a} | =7 | | | | |
| | | | | | | | j |
| | | j - | __ | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | |
| | | | | | j | | |
| | | | C | j | | | |
| | | P - | | | | |
| | j | | | | | | |
| | | | | | | |
| PULSE DURATION = 250as DUTY CYCLE = 0.5% MAX VGS =10V,ID = 70A | | | |
| | | | | | jj | 7 |
| | | | | j | | |
| | _ | rr | | | | |
| | | | | | | |
| | | | | | |
