RSC572-8M，there are the best RSC572-8M suppiers all over the world here.These are the list and detailed contact method of RSC572-8M suppliers all over the world as follows.You can buy or get informations of RSC572-8M through email , message or tel.

suppliers of RSC572-8M and PDF data of RSC572-8M

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

RSC572-8M Datasheet

Tabelle 2 Table 2	Helligkeitsdaten der 6-fach Multi-LED Brightness of the 6-chip Multi-LED
	IVrypmcd
Strom Current If [ mA ]		a	= X	=	= X E	=	= ^ =	l		o =	Schaltbild Nr. * Circuit diagram na. *
45	36	90	63	72	94	X	126	X	72	252	3
30	36	90	63	72	94	×	126	X	72	252	4
15	36	90	63	72	94	X	126	X	72	252
14	34	84	59	68	89	X	118	X	68	236
13	31	78	55	62	83	X	110	X	62	220	5
12	29	72	50	58	75	×	100	X	58	200	5
11	26	66	46	52	69	X	92	X	52	184
10	24	60	42	48	63	X	84	X	48	168
9	21	54	38	42	57	X	72	X	42	144	5
8	19	48	34	38	51	X	68	X	38	136	5
* Die Schaltbilder der Multi-LED Basiselemente finden Sie auf der Seile : 36 * The standard circuits of the M-LED basic elements are detailed on page: 36 Zur Bestimmung der Helligkeit entnehmen Sie bitte den Stromwert aus dem zugeordneten Artikelfeld To tind the brightness value refer to the current in the article field

RSC572-8M Price

Microsemi Catalog Number	Device Marking	Maximum Recurrent Peak Reverse Voltaqe	Maximum RMS Voltage	Maximum DC Blocking Voltage
1N5391GP		50V	35V	50V
1N5392GP		100V	70V	100V
1N5393GP		200V	140V	200V
1N5394GP		300V	210V	300V
1N5395GP		400V	280V	400V
1N5396GP		500V	350V	500V
1N5397GP		600V	420V	600V
1N5398GP		800V	560V	800V
1N5399GP		1000V	700V	1000V

RSC572-8M on stock

The bias feedback components between pin 4 and pin 2, con- sisting at C7, R7, and C2. operate as a DC self-biasing network. This C-R-C network prevents AC feedback and allows the preamp to establish a balanced input-and-output DC bias of 2.5 t0 2.6 volts. Resistor R11 provides the DC path for biasing between pins 5 and 3.

There are no on-chip pull-down structures associated with the dedicated input pins. Xilinx recommends that any unused dedicated inputs be terminated with external 10kQ pull-up resistors. These pins can be directly connected to Vcc or GND, but using the external pull-up resistors main- tains maximum design flexibility should one of the unused dedicated inputs be needed due to future design changes.

Suppliers Datasheet
		Exact Matc