| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
RSE-5-300-1 Datasheet Note 4: For the LT1581 adjustable device the minimum load current is the minimum current required to maintain regulation. Normally, the current in the resistor divider used to set the output voltage is selected to meet the minimum load current requirement. Note 5: The CONTROL pin current is the drive current required for the output transistor. This current will track output current with roughly a 1:100 ratio. The minimum value is equal to the quiescent current of the device. RSE-5-300-1 Price The TQ801 6 is a 1 6 x 1 6 differential digital crosspoint switch capable of handling l.3 Gbit/s data rate. The high data rate and exceptional signal fidelity is made possible with TriQuint's fully differential Source-Coupled FET Logic (SCFL) standard cells. The symmetrical switching characteristic RSE-5-300-1 on stock
Due to technical requirements components may contain dangerous substances. For inform ation on the t'/pes in question please contact your Infineon Technologies offices. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonabl,/ be expected to cause the failure of that life-support device or sx/stem. or to affect the safet,/ or effectiveness of that device or s\/stem Life support devices or sx/stems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
