MOTMap-13  > RSM3.475

suppliers of RSM3.475 and PDF data of RSM3.475

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  
RSM3.475 SEI    N/A    3000 

RSM3.475 Datasheet

Parameters 125NQ Units Conditions
Tj Max.JunctionTemperatureRange -55t0100 oc
T<in Max.StorageTemperatureRange stg ·55t0100 oc
RthjC Max.ThermaIResistancejunction to Case 040 0 c/w DCoperation *See Fig. 4
Rmcs TypicaIThermaIResistance,Caseto Heatsink 0 15 0 c/w Mountingsurface,smoothandgreased
wt ApproximateWeight 25.6(0.9) g(oz)
T MountingTorque Min. 40(35) Non-Iubricatedthreads
Max. 58(50) Kg-cm
TerminaITorque Min. 58(50) (lbf-in)
Max. 86(75)
Case Style HALF PAK Module


RSM3.475 Price

PARAMETER SYMBOL RATINGS UNITS
Input Voltage VIN 12 V
Output Current IOUT 500 mA
Output Voltage VOUT Vss-0.3~VIN+0.3 V
CE Input Voltage VCE Vss-0.3~VIN+0.3 V
Continuous Total SOT-25 Pd 150 mW
Power Dissipation SOT-89-5 Pd 500
Operating Ambient Temperature Topr -30~+80 oC
Storage Temperature Tstg -40~+125 oc


RSM3.475 on stock
A)Word/Byte Program (40H) Word/Byte program is executed by a two-command sequence. The Word/Byte Program Setup command of 40H is written to the Command Interface, followed by a second write specifying the address and data to be written. The WSM controls the program pulse application and verify operation. The Word/Byte Program Command is Valid for only Bank(l).
Power-Down Mode The PDxJ pin disables the internal oscillator and the oscillator output for power-sensitive applications. The power-down pin must remain low for at least two output frequency cycles plus 10Us for deglitching purposes. On power-up, the output is disabled until power is sta- ble and the voltage-controlled oscillator has generated 51 2 clock cycles.