MOTMap-12  > RT0402FRE0710KL

suppliers of RT0402FRE0710KL and PDF data of RT0402FRE0710KL

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  

RT0402FRE0710KL Datasheet
Kawasaki LSI assumes no responsibility or liability for (1) any errors or maccuracies contained in the information herein and (2) the use of the information or a portion thereofin any application, including any claim for (a) copyright or patent infringement or (b) direct, indirect, special or consequential damages. There are no warranties extended or granted by this document. The information herein is subject to change without notice form Kawasaki LSI
RT0402FRE0710KL Price
ilog's 25380 SCSI (Small Computer System Interface) controller, is a 40-pin DIP or 44-pin PLCC CMOS device. It was designed to implement the SCSI protocol as defined by the ANSI X3T9.2 Committee, and is a plug-in replacement of the industry standard; the NMOS 5380. The 25380 is capable of operating both as a Target and an Initiator. This enables the 25380 to find its use in Bus Host Adapters, Formatters, and Host Port designs. Special high-current open-drain outputs enable it to directly interface to, and drive, the SCSI bus. These drivers are capable of sinking 48 mA at 0.5V. The 25380 has the necessary interface hook-ups so the system CPU can communicate with it, like with any other peripheral device. The CPU can read from, or write to the SCSI registers which may be addressed as standard or memory-mapped l/O's. The 25380 increases system performance by minimizing the CPU intervention in DMA operations which the 25380 controls. The CPU is interrupted by the 25380 when it detects a bus condition that requires attention. It also supports arbitration and
RT0402FRE0710KL on stock
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 0r 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 0r 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com
Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation hardness assurance (e.g., aerospace equipment) is not supported.