| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
RT0805BRD07150K Datasheet To avoid initiation of a write cycle during Vcc power-up and power-down, a write cycle is locked out for Vcc less than 3.2V (typically 3.7V). If Vcc < VLKO, the command register is disabled and all internal program/erase circuits are disabled. Under this condition the device will reset to read mode. Subsequent writes will be ignored until the Vcc level is greater than VLKO. It iS the users responsibility to ensure that the control pins are logically correct to prevent unintentional writes when Vcc is above 3.2V. RT0805BRD07150K Price
RT0805BRD07150K on stock NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second 2. This is the increase in supply current for each input at 3.4V. 3. This data sheet limit may vary among suppliers. 4. This is the bus hold overdrive current required to force the input to the opposite logic state. These offices are supported by agents and distributors in major countries world-wide. This publication is issued to provide outline inform ation only which tunless agreed by the Company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. The Company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. For the latest product information, log on to www.zetex.com |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
