SKKL132-08E，there are the best SKKL132-08E suppiers all over the world here.These are the list and detailed contact method of SKKL132-08E suppliers all over the world as follows.You can buy or get informations of SKKL132-08E through email , message or tel.

suppliers of SKKL132-08E and PDF data of SKKL132-08E

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SKKL132-08E Datasheet

Oscillation: To test RF characteristics, this module is put on a fixture with two bias decoupling capacitors each on gate and drain, a 4.700 pF chip capacitor, located close to the module, and a 22 pF (or more) electrolytic capacitor. When an amplifier circuit around this module shows oscillation, the following may be checked: a) Do the bias decoupling capacitors have a low inductance pass to the case of the module? b) Is the load impedance ZL=50Q? c) Is the source impedance ZG=50Q?
SKKL132-08E Price

Only three power components and two feedback resistors are required to complete the design ofthe boost conve rte r, an external Schottky diode is not required. The high operating frequency allows the use of low value, low profile inductors and tiny external ceramic capacitors. The
SKKL132-08E on stock

NO	Item	Test Conditions	Test Hours/Cycle	Sample Size	Ac/Re
1	Solder Heat	TEMP : 2600C5 0C	5 SEC	76 PCS	0/1
2	Temperature Cycle	H : +850C 30min s 5 min L : -550C 30min	50 CYCLE	76 PCS	0/1
3	Thermal Shock	H : +ioooc Smin \ 10 sec L : -iooc Smin	50 CYCLE	76 PCS	0/1
4	High Temperature Storage	TEMPioooc	1000 HRS	76 PCS	0/1
5	Low Temperature Storage	TEMP-55	1000 HRS	76 PCS	0/1
6	DC Operating Life	IF=10 mA	1000 HRS	76 PCS	0/1
7	High Temperature / High Humidity	85/85% RH	1000 HRS	76 PCS	0/1

Dimensions	Inches	Millimeters
A	3.70	94.0
B	3.150+0.01	80.0+0.25
c	1.57	40O
D	1.34	34O
E	1.22 Max.	31.0 Max
F	O90	23.0
G	O85	21.5
H	0.79	20.0
J	0.71	18.0

Suppliers Datasheet
		Exact Matc