| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
SKKR400-02 Datasheet 3. The turn-off time of Qi, or rise time of the standby input is not critical for the PT7761. Turning Qi off slowly, over periods up t0 100ms, will not affect regulator operation. However, a slow tum-off time willincrease both the initial delay and rise-time of the output voltage. SKKR400-02 Price
SKKR400-02 on stock The inrush current from the connection of a heavy ca- pacitive load may cause the fault flag to fall for a short duration while the switch is in a constant-current mode for charging the capacitance. If needed, a simple lms RC low-pass filter in series with the fault flag circuit will prevent erroneous overcurrent reporting (see Fig- ure 4). Interrupt enable bit for Pn when Pn is config- ured as an input 1 = enabled 0 = disabled lf Fan Mode is selected, that is, the FAN bit of the DEV_CFG register is set to one, P[7:4] are automatically configured as open-drain outputs. They are then referred to as /FS[2:0] and /SHDN. No interrupts of any kind are generated by these pins while in Fan Mode. |
