| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SKL54C | TSC | 2008+ | SMC DO-214AB |
|
 |
||
| SKL54C | TSC | SMC/DO-214 | 2008+ | 60000 |
|
|
|
| SKL54C | TSC | 2009+ | 90000 |
|
|
||
| SKL54C | TSC | 2009+ | 90000 |
|
|
|
SKL54C Datasheet In quadrature modulation mode, on-chip mixing provides baseband-to-IF up-conversion. Mixing frequencies are flexibly chosen with a 32-bit programmable NCO. Channel carrier selection is performed at baseband by complex mixing in the ASIC/FPGA. Baseband I and Q from the ASIC/FPGA are input to the DAC5686, which interpolates the low data-rate signal to higher data rates. The single DAC output from the DAC5686 is the final IF single-sideband spectrum presented to RF. SKL54C Price The DRVcc regulator can supply uptolOOmAand is short- circuit protected. The output must be bypassed to the PGND pin in very close proximity to the IC pins with a minimum oflOuF ceramic, low ESR (X5R or X7R) capaci- tor. Good bypassing is necessary as high transient supply currents are required by the driver. If the input supply voltage, VIN,iS close to the required gate drive voltage,this regulator can be disabled by connecting the DRVcc and FB piris to VIN. SKL54C on stock 17 Wrns, (approx. - depands upon circuit layout) AWG #28 enameled copper wire. cla;e wound on 9/32" ceramic coil farm. Tuning provided by a powdered iron slug. 4-1/2 turns, AWG #18 ename!ed copper wire, Sf 16" 10 ng, 3/8" I.D. (AIR CORE). 3-1/2 turns, AWO #18 enameled copper wire. 1/4" long, 3/8" I.D. (AIR CORE).
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
