SKM150GAR125D，there are the best SKM150GAR125D suppiers all over the world here.These are the list and detailed contact method of SKM150GAR125D suppliers all over the world as follows.You can buy or get informations of SKM150GAR125D through email , message or tel.

suppliers of SKM150GAR125D and PDF data of SKM150GAR125D

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
SKM150GAR125D	SEMIKRON		N/A		100	Hongkong Wilwin Techonlogy Lim.. Contact:mr wang Tel:86-755-82976956 Fax:86-755-82976955 Email: leslie@wilwin-ic.cn
SKM150GAR125D	SEMIKRON	MODULE			37	SongYuan Electronics (HK) Co.,.. Contact:Vicky Tel:86-755-83044194 Fax:86-755-83044175 Email: songyuan-chen@163.com
SKM150GAR125D	SEMIKRON	MODULE IGB	04+	MODULE IGBT	37	PENGHUIDA ELECTRONICS(HK) LIMI.. Contact:Xiao Tel:86-755-82807577 Fax:86-755-82581450 Email: phdic9@gmail.com

SKM150GAR125D Datasheet

	Test		Limits
Characteristic	Pin	Test Conditions	Min. Typ. Max.	Units
Timer Start Input Current	1	VIN= 9.0 V	20 80	cCA
Timer Out Output Current	4	VOUT= 0.5 V	500	cCA
LED Output ON Current	5	VDD = 7.2 V, VOUT = 1.0 V	10	mA
LED Output ON Time	5	No Local Alarm; Not Latched	8.0 10 12	ms
LED Output OFF Time	5	No Alarm, In Standby	32 40 48	S
LED Output OFF Time	5	No Alarm, Timer Mode	8.0 10 12	S
I/O Current	2	No Alarm, Vuo = VDD - 2.0 V	25 60
		Alarm, Vuo = VDD - 2.0 V	-7.5	mA
		Charge Dump, Vuo = 1.0 V	5O	mA
I/O Charge Dump Duration	2	After Local Alarm or Test	1.33 1.66 1.99	S
I/O Alarm Voltage	2	External Alarm In	3.0	v
I/O Delay	2	Alarm Out	3.0	S
Supply Current	6	VDD = 9.0 V, No Alarm, No Loads	5.0 9.0
Supply Current	6	VDD = 12 V, No Alarm, No Loads	12

SKM150GAR125D Price

	¨EV	15V l2Y
	\|	\|7	10V
		I

j			8v
f_

SKM150GAR125D on stock

Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and coMgurations can be furnished, depending on quantities. Aries reserves the right to change prod- uct specifications without notice.

The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.

Suppliers Datasheet
		Exact Matc