| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SKS10N20 | 0628+ | 08+ | 原装热卖现货 | 9120 |
|
||
| SKS10N20 | 仙童 | 3000 | 仙童 |
|
|
SKS10N20 Datasheet While the transceiver is sending data to the transponder, two different modulations will be observed on both coils. During the first 16 clocks of a bit period, the EM4469 is switching "ON" its modulation device causing a modulation of the RF field. This modulation can also be observed on the transceiver's coil. To send a bit "0" the transceiver will switch "OFF" the field, and this 100% modulation will be observed on the transponder coil. SKS10N20 Price Timing C onversion by the AD 9022 is initiated by the rising edge of the ENC OD E clock (Pin 8). All required timing is generated inter- nal to the AD C. C are should be taken to ensure that the encode clock to the AD9022 is free from jitter that can degrade dy- namic performance. The clock driver should be compatible with TTL LS logic series devices. Drivers with excessive slew rate or overdrive will degrade the dynamic performance ofthe AD9022 SKS10N20 on stock
EXTVcc (Pin 30): External Power Input to an Internal Switch. This switch closes and supplies INTVcc, bypass- ing the internallow dropout regulatorwhenever EXTVcc is higher than 4.7V. See EXTVcc Connection in the Applica- tions Information section. Do not exceed 7V on this pin and ensure VEXTVCC " VINTVCC |
