SL2100，there are the best SL2100 suppiers all over the world here.These are the list and detailed contact method of SL2100 suppliers all over the world as follows.You can buy or get informations of SL2100 through email , message or tel.

suppliers of SL2100 and PDF data of SL2100

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SL2100 Datasheet

Parameter	Symbol	Min.	Typ.	Max	Unit	Conditions	Measurement Circuit
Input low level voltage	VIL			0.2× Vcc	V	CS, SK, Dlo pin
Input high level voltage	VIH	0.8× Vcc			V	CS, SK, Dlo pin
Output low level voltage	VOL	O		0.4	V	IOL= 2.'ImA	Fig.l
Output high level voltage	VOH	Vcc - 0 4		Vcc	V	IOH= - 0.4mA	Fig.6
Input leakage current	lLl	-1		1		VIN=0Vcc	Fig3
Output leakage current	IL	-1		1		Vour = 0 ~ Vcc, CS = Vcc	Fig.4
Operating current consumption	lcc			3	mA	f=1MHz,tEIW=10ms(WRITE)	Fig.5
Standby current	ISB			200		CS, SK, Dl0, VH, VL, VW = Vcc	Fig.6
SK frequency	fSK			1	MHz
Total resistance	RT		100		kl	If= 10ccA	Fig.7
Wiper resistance	Rw		0 5	1	kl	lw= -1mA	Fig.8
Resistance potential on High side	VVH	0		Vcc	V
Resistance potential on Low side	VVL	0		Vcc	V

SL2100 Price

	mm			inch
DIM	MIN	TYP	MAX	MIN	TYP	MAX
A			1.1			0.043
A1	0.05		0.15	0.002		0.006
A2		0.9			0.035
b	0.17		0.27	0.0067		0.011
c	0.09		0.20	0.0035		0.0079
D	12.4		12.6	0.408		0.496
E	7.95		8.25	0.313		0.325
E1	6.0		62	0.236		0.244
e		0.5 BSC			0.0197 BSC
K	0Y		8Y	0Y		8Y
L	0.50		0.75	0.020		0.030

SL2100 on stock


		tf
vcc ~/UUV	1 -	~	lc:IBl:IB2:5:1:-2

Notes: 1. The Standby input on the PT7710 regulator family must be controlled using an open-collector (or open-drain) discrete transistor. Do Not use a pull-up resistor. The controlinput has an open-circuit voltage equal to Vin. To set the regulator output to zero, the control pin must be "pulled" to less than 0.8Vdc with a 0.5mA sink to ground.

Suppliers Datasheet
		Exact Matc