| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SV1007-903 | 300 | SGC | 99 |
|
|||
| SV1007-903 | SGC | New and O | 99 |
|
![]() |
||
| SV1007-903 | SGC | 09+ | 300 |
|
![]() |
||
| SV1007-903 | SGC | . | 99 | 300 |
|
![]()
|
|
| SV1007-903 | 300 |
|
|||||
| SV1007-903 | SGC | 99 | 300 |
|
![]() |
||
| SV1007-903 | SGC | . | . | . | 300 |
|
![]() |
| SV1007-903 | 458 |
|
|||||
| SV1007-903 | SGC | 05+ | 323 |
|
![]()
|
||
| SV1007-903 | SGC | . | 600 |
|
|||
| SV1007-903 | SGC | 99 | 300 |
|
|||
| SV1007-903 | SGC | 04+ | 500 |
|
![]()
|
||
| SV1007-903 | SGC | 99 |
|
||||
| SV1007-903 | 300 |
|
|||||
| SV1007-903 | SGC | 07+/08+ | 300 |
|
|||
| SV1007-903 | 300 |
|
|||||
| SV1007-903 | SGC | 99 | 300 |
|
|||
| SV1007-903 | SGC | 2005 | 500 |
|
|||
| SV1007-903 | SGC | 99 | 300 |
|
|||
| SV1007-903 | 300 | SGC | 99 |
|
|||
| SV1007-903 | 300 | SGC | 99 |
|
|||
| SV1007-903 | SGC | 99 | 300 |
|
|
SV1007-903 Datasheet AMD's products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD's product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. SV1007-903 Price
SV1007-903 on stock Output Voltage Selection The MAX8740 0perates with an adjustable output from VIN t0 28V. Connect a resistive voltage-divider from the output (VOUT) to GND with the center tap connected to FB (see Figure l). Select R2 in the 10kQ t0 50kQ range. Calculate Rl with the following equation: Some applications require the load switch to oper- ate at a continuous nominal current level with short duration, high-current peaks. The duty cycle for both output current levels must be taken into account. To do so, first calculate the power dissi- pation at the nominal continuous current level, and then add in the additional power dissipation due to the short duration, high-current peak scaled by the duty factor. |