| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
SWPRISMASPSDA Datasheet Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability SWPRISMASPSDA Price Intermodulation Distortion With inputs consisting of sine waves at two frequencies, fa and fb, any active device with nonlinearities will create distortion products at sum and difference frequencies of mfa + nfb where m, n = 0, 1, 2, 3, etc. Intermodulation terms are those for which neither m or n are equal to zero. For example, the second order terms include (fa + fb) and (fa - fb), while the third order terms include (2 fa + fb), (2 fa - fb), (fa + 2 fb) and (fa - 2 fb). SWPRISMASPSDA on stock (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. where i is the address, Ti is the measured delay at the i'th address, To is the measured inherent delay, and Tine is the nominal increment. It is very similar to the INL, but simpler to calculate. For most dash numbers, the relative error is less than 1.0 LSB at every address (see Table l: Delay Range). |
