| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SWT30-525 | LAMBDA | N/A | 08+ | New original | 650 |
|
|
SWT30-525 Datasheet General Layout Considerations Due to the high switching frequency and high transient currents produced by the device, careful board layout is a must.A clean board layout using a ground plane and short connections to all capacitors will improve noise perfor- mance and ensure proper regulation. SWT30-525 Price Polling During a Write, Program or Erase Cycle A further improvement in the write, program or erase time can be achieved by not waiting for the worst case delay (tPW, tPP, tPE, or tSE). The Write In Progress (WIP) bit is provided in the Status Register so that the application program can mon- itor its value, polling it to establish when the previ- ous cycle is complete. SWT30-525 on stock Multicast, Broadcast, specific packet match or any packet - Loopback mode PHY: - Wave shaping output filter - Loopback mode Operational: - Outputs for 2 LED indicators - Transmit and receive interrupts - 25 MHz clock - Clock out pin with programmable prescaler - Operating voltage range of 3.14V t0 3.45V - Temperature range: -400C to +85aC Industrial, OoC to +700C Commercial (SSOP only) 28-pin SSOP, SOIC, SPDIP and QFN packages
|
