| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SX-3-30MHZ | SUNNY | X-TAL | NA | 进口原装公司现货 | 2,473 |
|
|
SX-3-30MHZ Datasheet stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. SX-3-30MHZ Price AUTOSTORE The value of the counter is stored in EEPROM memory whenever the chip senses a power-down of VDD while STR is enabled (held LOW). When power is restored, the contents ofthe memory are recalled and the counter reset to the last value stored. If AUTOSTORE is to be imple- mented, STR is typically hard wired to GND. If STRis held HIGH during power-up and then taken LOW, the wiperwill not respond to the UP or DWN inputs until STR is brought HIGH and the store is complete. Figure l. SX-3-30MHZ on stock
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
