MOT > Map-5 > SXA1341862P1A

SXA1341862P1A，there are the best SXA1341862P1A suppiers all over the world here.These are the list and detailed contact method of SXA1341862P1A suppliers all over the world as follows.You can buy or get informations of SXA1341862P1A through email , message or tel.

suppliers of SXA1341862P1A and PDF data of SXA1341862P1A

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SXA1341862P1A Datasheet

Pin	Name	Input /Output	Functions
Vcc, Vss	Power supply input		Apply 5 V+ 0.5 V to Vcc, and o V to Vss.
MDO	MDO	Input	Connect this pin to Vss.
MD1	MD1	Input	Connect this pin to Vss via a resistor of 10 kl t0 100 kl .
RESET	Reset input	Input	The reset input pin.
XIN	Clock input	Input	Connect a ceramic oscillator between the XIN and XOUT pins, or input an external
XOUT	Clock output	Output	clock from the XIN pin with the XOUT pin left open.
AVcc, AVss	Analog supply input		Connect AVcc to Vcc, and AVss to Vss.
VREF	Reference voltage input	Input	Input an arbitrary level within the range of Vss-Vcc. (This is not used in the flash memoW serial l/0 mode.)
P10-P1-r	Input port P1	Input	Input "H" or "L", or leave them open. (This is not used in the flash memory serial l/0 mode.)
P20-P23, P27 P24 P2s P26	Input port P2 _SCLK input SDA l/0 BUSY output	_lnput_ _Input_ 1/0 Output	Input "H" or "L", or leave them open. (This is not used in the flash memory serial l/0 mode.) This is an input pin for a serial clock. This is an l/0 pin for serial data. Connect this pin to Vcc via a resistor (about l_k I ). This is an output pin for the BUSY signal.
P60UTCUT	P60UTCUT input	Input	Input "H".
P55-P57	Input port P5	Input	Input "H" or "L", or leave them open. (This is not used in the flash memory serial l/0 mode.)
P60-P6s	Input port P6	Input	Input "H" or "L", or leave them open. (This is not used in the flash memory serial l/0 mode.)
P70-P74	Input port P7	Input	Input "H" or "L", or leave them open. (This is not used in the flash memory serial l/0 mode.)
VCONT	Filter circuit connection		Connect this pin to the filter circuit, or leave this pin open. (This is not used in the flash memory serial l/0 mode.)

SXA1341862P1A Price

Parameter/Test Condition	Symbol	Limit	Unit
Gate-Drain Voltage	VGD	-25	v
Gate-Source Voltage	VGS	-25	V
Gate Current	IG	10	mA
Power Dissipation	PD	360	mW
Power Derating	PD	3.27	mW/ oC
Operating Junction Temperature	TJ	-55 t0 135	oC
Storage Temperature	Tstg	-55 t0 150	oC
Lead Temperature (1/16" from case for 10 seconds)	TL	300	oC

SXA1341862P1A on stock

		TC55V400AFT
SYMBOL	PARAMETER	-55		-70		UNIT
SYMBOL	PARAMETER	MIN	MAX	MIN	MAX	UNIT
twc	Write Cycle Time	70		85
tWP	Write Pulse Width	50		55
tcw	Chip Enable to End of Write	60		70
tBW	Data Byte Control to End of Write	50		55
tAS	Address Setup Time	0		O
tWR	Write Recovery Time	0		O		ns
ODW	R/W Low to Output High-Z		30		35
LOEW	R/W High to Output Active	0		O
tDS	Data Setup Time	30		35
tDH	Data Hold Time	0		O

Pin Names	Description
OE	Output Enable (Active LOW)
Ax	Port A Inputs or Outputs
Bx	Port B Inputs or Outputs