| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
SY100S321JCTR Datasheet
SY100S321JCTR Price which operates at 2.7V supply voltage. The CMV7106 also has the added shutdown feature that greatly reduces supply current to less than lpA when idle.The shutdown mode is controlled by an extra pin, and is compatible with most logic family signal levels. It is the practical solution for 3V applications. SY100S321JCTR on stock Current measurement and the current accumulation are both internally compensated for offset on a continual basis minimizing error resulting from variations in device temperature and voltage. Additionally, a constant bias can be utilized to alter any other sources of offset. This bias resides in EEPROM address 33h in two's-complement format and is subtracted from each current measurement. The current offset bias is applied to both the internal and external sense resistor configurations. The factory default for the current offset bias is a value of 0. The recommended dose of ultraviolet light for erasure is a wavelength of 2537 angstroms for a minimum dose (UV intensity multiplied by exposure time) of 25 Wsec/cm2. For an ultraviolet lamp with a 12 mW/cm2 power rating, the exposure time would be approximately 35 minutes. The 7C261 0r 7C263 needs to be within l inch of the lamp during erasure. Permanent damage may result if the PROM is exposed to high-intensity UV light for an extended period of time. 7258 Wsec/cm2 is the recommended maximum dosage. |
||||||||||||||||||||||||||||||||||||||||||
