TPS54160PWPR，there are the best TPS54160PWPR suppiers all over the world here.These are the list and detailed contact method of TPS54160PWPR suppliers all over the world as follows.You can buy or get informations of TPS54160PWPR through email , message or tel.

suppliers of TPS54160PWPR and PDF data of TPS54160PWPR

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

TPS54160PWPR Datasheet

NOTE: 1. Permanentdevicedamage mayoccurifABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections ofthisdata sheet. Exposure toABSOLUTE MAXIMUM RATING conditions for extended periods may affect device reliability.
TPS54160PWPR Price

	PACKAGE
TYPE NUMBER	NAME	DESCRIPTION	VERSION
PEMH1		plastic surface mounted package; 6 leads	SOT666
PUMH1		plastic surface mounted package; 6 leads	SOT363

TPS54160PWPR on stock

Item	Symbol	Test Cire uit	Condition		typ	max.	Unit
	B¨)	1	Vcc=12V	- 300
	B(2)	1	Vcc =12V			300
		2	Vc.c=16V, Io=12mA, B--300 Gauss			0.4	V
--^	VOL	2	Vcc=8V, Io=12mA, B-300 Gauss			0.4	V
		3	Vcc=16V, Io=-30pA, B=-300 Gauss	12			V
0 p^-	VOH	3	Vcc=8V, Io=-30VA, B=-300 Gauss	4			V
	-Ios	4	Vcc=16V, Vo = OV, B=-300 Gauss	O32		0.68	mA
		5	Vcc =16V			6	mA
	Icc	5	Vcc=8V			5.5	mA

WeightVertical/Horizontal 55 grams Flammability____ Materials meet UL 94V-O Notes:(i)ISR-will operate down to0 load witb reduced specifications. (2) If the Remote Sense Ground (Pin 15) is not zLsed, it must be connected to pin 16 for optinzum output voltage accunicy (3) The Standby control (pin6)Inist internal pull-zLp, and if left open-circuit the modzde will operate wben input power is applied. ( For operation below OoC, Cin and Cout must have stable characteristics. Use either low ESR tantalumor Oscon~ capacitors. (5) See safe Operating Area curves or consult factory for the appropriate derating. (6) The case pi72S othe tbrough-bole package types (sufflxes NA)must be soldered. For more information see the applicable package outline drawing. External Capacitors:Tbc P7'7761 series requiresminimum ouput capacitance of 3307iF for proper operation. The PT7761 also requiresminimum input capacitance of l,5007LF which must be rated forminimum of l.4Arms of ripple current. For transient or dynamic load applications, additioizal capacitance may be required. For furtber information refer to the application izote regarding capacitor selection for this product Input Inductor: An input inductor is optional for most applications. The input inductor must be sized to handle 30ADC witbtypical value of 171H.

Suppliers Datasheet
		Exact Matc