| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| TPS77525 | TI | DIP/SOP | 09+ | 现货热卖，全新原装，欢迎来电 | 5180 |
|
|
TPS77525 Datasheet The 5 mH is practically too high and hence not very practical. Therefore, the inductor is basically selected by market available inductor models which is with a normally smaller inductance (but not too small). It must have enough saturation current level (>300 mA). If inductance is too TPS77525 Price 1.1 Performance-optimized ATA Controller The heart of the ADC is the ATA controller which translates standard ATA signals into Flash Media data and controls. SST's ADC contains a proprietary ATA controller that was specifically designed to attain high data throughput from host to Flash. The following components contribute to the ATA controllers operation. TPS77525 on stock
Thermal shutdown is the second fault protection mecha- nism and protects the module's internal circuitry against excessively high temperatures. A rise in the temperature of the internal circuitry may be the result of a drop in airflow, a high ambient temperature, or a sustained over- current load fault. If the junction temperature of the internal components exceed 150 aC, the module will shutdown. Once in thermal shutdown, the regulator is disabled and the output voltage is reduced to zero. The recovery is automatic and begins with a soft-start power up. Recovery occurs when the the sensed temperature decreases 10 0C below the trip point. |
