| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
TR-3216FF-7.5A Datasheet
TR-3216FF-7.5A Price The AD8138 uses two feedback loops to separately control the differential and common-mode output voltages. The differential feedback, set with external resistors, controls only the differen- tial output voltage. The common-mode feedback controls only the common-mode output voltage. This architecture makes it easy to arbitrarily set the output common-mode level. It is forced, by internal common-mode feedback, to be equal to the voltage applied to the VOCM input, without affecting the differential output voltage. TR-3216FF-7.5A on stock The TDA 4862 totem pole output stage is MOSFET compatible. An internal protection circuitry is activated when Vcc is within the stand by mode and ensures that the MOSFET is turned-OFF. The totem pole output has been optimized to minimize cross conduction current during high speed operation. The addition of tw0 4 I resistors, one in series with the source output transistor and one in series with the sink output transistor, reduces the cross conduction current. INT (Interrupt Output) - The INT pin is an active high output of the DS1673 that can be used as an interrupt input to a microprocessor. The INT output remains high as long as the status bit causing the interrupt is present and the corresponding interrupt-enable bit is set. The INT pin operates when the DS1673 is powered by Vcc or VBAT. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
