| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
TR-70B50S3-MZ Datasheet
TR-70B50S3-MZ on stock Notes: 1. Only an active RD or RD input is required to transfer data from the UART during a read opera- tion. Therefore, tie either the RD input per- manently low or the RD input permanently high, when it is not used. 2. Only an active WR or WR input is required to transfer data to the UART duning a write opera- tion. Therefore, tie either the WR input per- manently low or the WR input permanently high, when it is not used. 3. An active A-DS input is required when the Register Selecf (AO, A1, A2J signals are not stable for the duration of a read or wite operation. If not required. tie the ADS input permanently low. External component selection for this low-power amplifier involves only two capacitors - one for output coupling and one for feedback and ripple decoupling. The coupling capacitor value should be selected to provide the desired low-frequency cutoff with the chosen load impedance. The decoupling capacitor should be chosen for both low-frequency audio rolloff and supply-ripple rejection. |
