TR402ST10，there are the best TR402ST10 suppiers all over the world here.These are the list and detailed contact method of TR402ST10 suppliers all over the world as follows.You can buy or get informations of TR402ST10 through email , message or tel.

suppliers of TR402ST10 and PDF data of TR402ST10

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

TR402ST10 Datasheet

			TEST		UM ITS
SYMBOL	PARAlIETER		CONDITIWW		UIN	TYP.	MAX	UNIT
			TA= -300C		-1060		-890	mV
VOH	High level output voltage		TA= +250C	Apply VIHNIAX to allinputs.	-960		-810	mV
VOH	High level output voltage		TA= +s50c	Apply VIHNIAX to allinputs.			-700	mV
			TA= -300C	Apply VIVIT to Do input with VU_UIN	-1080			mV
VOHT	High level output		T^= +250C	applied to Di. D2. and D3 inputs and	-980			mV
VOHT	threstWd voltage		T^= +850C	VIHMAX applied to all other inputs.	-010			mV
			TA= -300C	Apply VtT to Da input with VILN11N			-1655	mV
VOLT	Low level output		TA= +250C	applied to Di. D2. and D3inputs and			-1630	mV
VOLT	1hreshold voltage		T^ - +850C	VIHUAX applied to all other inputs.			-1595	mV
			TA - -300C		-2000		-1675	mV
VOL	Low level output voltage		TA= +250C	Apply VLMIN to allinputs.	-1990		-1650	rrN
VOL	Low level output voltage		TA+850c	Apply VLMIN to allinputs.	-1920		-1615	rrN
			TA -300C				495	mV
		De	TA= +250C				310	mV
IH	High level input	input	TA= +850C	Apply VLUAX to each input under tast, one at a			310	mV
	current	All	TA - -300C	time, with VILMJN applied to all other inputs.			390	mV
		other	T^= +250C				245	mV
		inputs	TA= +850c				245	mV
			TA-300C	Apply VLUIN to each input under	0 5
k	Low levelinput current		TA- +250C	test, one at a time, with VHMAX	O5			UA
k	Low levelinput current		TA= +s50c	applied to all other inpuLs.	03			M
			TA= -300C				29	mA
-IEE	VEe supply current		TA= +250C			20	26	mA
-IEE	VEe supply current		TA= +850C				29	mA
AVOH AVEE	High level output vokage compensation					0016		VN
AVot AVEE	Low level output voltage compensation		TA= +250C			0 250		VN
AVaa VEE	Reference bias voltage compensation		TA= +250C			0 148		VN

TR402ST10 Price

Parameter		Symbol	Rating	Unit
Reverse voltage (DC)		VR	30	V
Repetitive peak reverse-voltage		VRRM	30	V
Peak forward	Single	IFM	300	mA
current	Double	IFM	225	mA
Average forward	Single	IF(AVl	200	mA
current	Double	IF(AVl	150	mA
Non-repetitive peak	Single	IFSM	1	A
forward-surge-current '2	Double	IFSM	0 75	A
Junction temperature		Ti	150	oC
Storage temperature		Tstg	-55 to +150	OC

TR402ST10 on stock

Data are written serially, most significant bit first, in 8, 16 0r 24-bit increments. Data are sampled and shifted into the PWMs shift register on each rising edge of the SCK. The serial clock should remain low when inactive. Therefore, when using a 68HC05 microcontroller's SPI port to provide data, program the microcontroller's SPI control register bits CPOL. CPHA t0 0. 0.

Parameter	Symbol	Condons	Ratings	Unit
Recommended supply voltage	vcc		5.0	v
Operating supply voltage range	Vccop		4.8 t0 5.2	V

Suppliers Datasheet
		Exact Matc