XC68030RC20，there are the best XC68030RC20 suppiers all over the world here.These are the list and detailed contact method of XC68030RC20 suppliers all over the world as follows.You can buy or get informations of XC68030RC20 through email , message or tel.

suppliers of XC68030RC20 and PDF data of XC68030RC20

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
XC68030RC20	MOTOROLA	PGA	00+	Original	120	Minchin WaiYip Development Co... Contact:Edison Chan Tel:86-755-61667059 Fax:86-755-61303859 Email: mingqindianzi@live.cn
XC68030RC20	MOTOROLA	PGA	00+	Original Stock	120	MingQin weiye development Co.,.. Contact:Edison Chan Tel:86-755-61667059 Fax:86-755-61303859 Email: mingqindianzi@live.cn
XC68030RC20	MOT		87	Shenzhen original sp	424	SHENZHEN ONTHEWAY TECHNOLOGY C.. Contact:wang Tel:86-755-83723820 Fax:86-755-83723820 Email: otwew@otwew.com.cn
XC68030RC20	MOTOROLA	PGA	05+		485	Haodexin Electronic Co Limited Contact:Cathy Lu Tel:00852-30592291 Fax:00852-30592292 Email: sales8@haodexin.com

XC68030RC20 Datasheet

IAC (Pin 4): This is the AC line voltage sensing input to the multiplier. It is a current input that is biased at 2V to minimize the crossover dead zone caused by low line voltage. A 32k resistor is in series with the current input, so that a small external capacitor can be used to filter out the switching noise from the high impedance lines.
XC68030RC20 on stock

VCC3 (Pin 21): 3.3 volt host side supply input. This input is monitored for power integrity. If it falls below the 3.3V sense threshold, the SGNL_VLD signal is de-asserted and the high side drivers disabled.

Data sheet status
Objective specification	This data sheet contains target or goal specifications for product development.
Preliminary specification	This data sheet contains preliminary data; supplementary data may be published later.
Product specification	This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.

Suppliers Datasheet
		Exact Matc